Viessmann Vitodens 200-W Combi: 7" colour touch screen and outdoor sensor (7956246) 35 kW - Z020316
by VIESSMANN
Original price
Original price
-
Original price
Original price
Current price
-
Current price
Please call to check availability before ordering Live Chat / 01985 850982
The very latest version of the Vitodens 200-W wall mounted combination boiler is an internet ready, intelligent energy centre that meets the highest standards of convenient heat supply.
- 7" Colour touch screen control with outdoor temperature sensor for weather compensation operation
- Integral wi-fi interface
- Standard seasonal efficiency [to DIN]: 98 % (Hs) [gross cv]
- Modulation range down to 1:17
- Energy efficiency class A
Features
- Lambda Pro Plus combustion controller for all gas types
- 10ltr internal heating circuit expansion vessel
- Quiet operation thanks to low fan speed and high efficiency internal pump
- Supplied with the very latest software and programming features
- Especially straightforward intuitive controls, extremely convenient to operate using the 7" colour touch screen
- Integral WiFi interface for internet connectivity and ViCare app (Vitoconnect 100 not required).
- High operational reliability thanks to the integral Lambda Pro Plus combustion controller
- Greater efficiency and less nitrogen oxide with the new MatriX-Plus burner
- All consumption at a glance with the energy cockpit
- Suitable for integrating a solar thermal system
- Fluorescent light guide means you always know if everything is working properly
- Large water capacity; low cycling frequency, even when little heat is drawn off
- Durable and efficient thanks to Inox-Radial heat exchanger, complete with 10 year warranty
- MatriX-Plus burner with a long service life thanks to stainless steel MatriX perforation
Standard Included:
- Modulating, fan-assisted premix burner with Lambda Pro Plus
- Control unit with integral WiFi interface
- Integral safety valves
- Variable speed high efficiency circulation pump and 3-way valve
- Expansion vessel (10 litres)
- Fully plumbed and wired
- Boiler flue connection
- Outside temperature sensor
Note: Vitodens 200-W Combi 35kw (Z020316) on Box might say B2KF-32kw ( 7956246 ) which is the same. The label shows 32kw - as the output for the heating is 32kw but the water is 35kw.
Download the Viessmann ViCare Application:
- ViCare on Google Play
- ViCare on App Store
Downloads - System design guidelines
- Maintenance Checklist
- Install Instructions
- Service Instructions
- System design guidelines
Compatible Installation Accessories
Note:- Search Product Accessories code in Store Search bar.
| * Connection set to be ordered separately from below options | |
| ZK04919 | * Pre-plumbing jig for surface mounting including valves |
| ZK04925 | * Valves/fittings pack for surface mounting |
| ZK04922 | * Spacer frame for rear pipework including valves |
| ZK04926 | * Flush mounting valves/fittings pack including backplate |
BOILER CONTROLS
| Product Code | Description |
| Z017415 | Vitotrol 200-E hard wired remote control unit (PlusBus) - max two Vitotrol per boiler |
| 7438537 | Room temperature sensor - to supplement Vitotrol 200-E |
| ZK04647 | Contact thermostat for B2HE/B2KE |
BOILER ACCESSORIES
| Product Code | Description |
| ZK04304 | Sub-mounting kit with mixer for system boiler can only be used in conjunction with a surface mounted pre-plumbing jig. |
| ZK04928 | Sub-mounting kit with mixer for combi boiler can only be used in conjunction with a surface mounted pre-plumbing jig |
| ZK05677 | Wall spacer frame & fasteners. Wall clearance: 90 mm |
| 7425493 | Contact temperature limiter for underfloor heating systems |
| ZK04310 | Valve/fittings cover for 450mm wide boiler |
| 7464889 | By Pass Valve wth O rings |
| ZK01989 | Straight-through Gas Valve R1/2 for flush mounting |
| ZK01990 | Angle Gas Valve R1/2 for flush mounting |
| ZK04032 | Temperature sensor for low loss header |
| ZK03679 | Vertical low loss header 1" connections (3 cubic metre) |
| ZK03682 | Wall mounting bracket for vertical low loss header |
| Z017409 | EM-MX mixer extension kit including MIXER MOTOR (Mixer mounted) |
| Z017410 | EM-M1 mixer extension kit without MOTOR (Wall mounted) |
| Z017414 | EM-MX mixer extension for DIVICON |
| 7465894 | Single Divicon wall mounting bracket |
| 7460638 | * Manifold for 2 Divicons (3/4 or 1") |
| 7460643 | * Manifold for 3 Divicons (3/4 or 1") |
| * Requires additional Low loss header and brackets as below | |
| 7460649 | Low loss header 100/60 for Divicon Manifold (3/4 or 1") with flow rate up to 4.5m3/h |
| 7465439 | Multiple divicon manifold wall mounting bracket |
| Z024683 | Divicon heating circuit distributor with mixer 3/4" |
| Z024684 | Divicon heating circuit distributor with mixer 1" |
| Z017411 | EM-P1 pump extension for DHW secondary pump, or pump without mixer |
| Z019336 | EM-S1 solar module extension |
| Z017412 | EM-EA1 extension |
| 7574319 | Cylinder demand box (System boiler) |
| 7369810 | Condensate pump for low level boiler installation |