Viessmann 16 kW Vitocal 200-A Air Source Heat Pump (AWO-M 201.A16) Heat Only - Z015206
by VIESSMANN
SKU Z015192
Please call to check availability before ordering Live Chat / 01985 850982
Under floor or through wall connection fittings
Heat pump plinth or wall mounting fittings
Suitably sized buffer vessel
Sensors
An ideal solution for environmentally responsible, low cost heating
With energy ratings of A++, our monobloc Vitocal 200-A heat pump provides cost effective and environmentally responsible heating. It is also extremely quiet
- Monobloc air source heat pumps, 2.3 to 11.8 kW (at A-7/W35)
- Low operating costs thanks to high COP (coefficient of performance)
- Especially quiet, thanks to advanced acoustic design (AAD)
- High product quality and a modern, timeless design – Made in Germany
- Maximum flow temperature up to 60°C
- Monobloc indoor unit with high efficiency circulation pump
- Easy to operate Vitotronic control unit with plain text and graphic display
- Prepared for use of power generated on site from photovoltaic systems
- Web-enabled via free ViCare app and Vitoconnect (optional)
- Energy efficiency class* A+++ (Models A04/A06 A ++)
- *Energy efficiency class according to EU Regulation No. 811/2013 Heating, average climatic conditions - Low (35°C) / medium temperature application (55°C)
Vitotronic 200 Type WO1C Control:
- Digital heat pump control unit
- Cylinder temperature control
- Operation with user prompts
- Control of an additional oil/gas boiler
- Cascade control for up to 5 Vitocal (requires accessories)
- Divicon/Mixer control of up to 1 heating circuit without mixer and 2 heating circuits with mixer (requires accessories)
- Swimming pool heating
- Optimised utilisation of power generated on site
- Integral heat meter
Please note, the appliance requires a number of installation accessories, including:
These items must be ordered separately Additionally the installer will need to size and select an expansion vessel for the heating system.
-
Downloads
- Connection and Wiring Diagram
- Service Instructions
- Operating Instructions
- System design guidelines
- Heat pump principles
- Maintenance Checklist
- Install Instructions
Compatible Installation Accessories
Note:- Search Product Accessories code in Store Search bar.
Product Code | Installation Packs | Capacity |
Z025199 | Vitocal 200-A comprising: ground support feet, electric trace heater, ball valve with filter, power supply isolator, energy meter, wall-mounted heating buffer vessel (46 l), dhw cylinder temperature sensor, Vitoconnect internet interface |
Vitocal 200-A |
ZK06694 | Vitocal 222-A comprising: ground support feet, electric trace heater, ball valve with filter, power supply isolator, energy meter, rear-mounted heating buffer vessel (40 l), indoor unit connection set, Vitoconnect internet interface |
Vitocal 222-A |
Product Code | Outdoor Unit | Capacity |
ZK02929 | Support frame for ground mounting | |
ZK02930 | Support frame for wall mounting | |
7521273 | Hydraulic connection set - underground | 5m |
7521274 | Hydraulic connection set - underground | 10m |
7521275 | Hydraulic connection set - underground | 15m |
7521276 | Hydraulic connection set - underground | 20m |
ZK02938 | Connection set between outdoor unit (ground-mounted) and hydraulic pipes | |
ZK02939 | Connection set (wall-mounted) | |
ZK04096 | Drain set for condensation run-off via pipe | |
ZK04097 | Electric trace heater for condensate tray - free run-off to ground | |
ZK04098 | Electric trace heater for condensate tray- run-off via pipe | |
7635202 | AC isolator for outdoor unit power supply | |
7495694 | Energy meter |
Product Code | Indoor Unit | Capacity |
Z017685 | Vitocell 100-W SVPA heating buffer vessel 46 litre - wall-mounted | |
ZK03801 | Vitocell 100-E SVPA heating buffer vessel 40 litre- installed behind Vitocal 222-A | Vitocal 222-A |
ZK02960 | Heating circuit connection set - vertical connection | Vitocal 222-A |
ZK02959 | Heating circuit connection set - side connection | Vitocal 222-A |
ZK03206 | Ball valve with filter | |
ZK02936 | Electric flow heater - for retrospective installation in Heat Only version | Vitocal 200-A |