Sunamp Thermino 150 ( Indirect Cylinder Replacements ) Boilers and Heat pumps Thermal Battery
Works with Boiler & heat Pump - Indirect or heat pump cylinder without immersion
Thermino – The energy-saving, indirect hot water heater that works with boilers and heat pumps to lower fuel consumption.
Thermino is the space-saving alternative for indirectly heated vented and unvented hot water cylinders and hot water-only thermal stores. Easy to install, they are specially designed to work with boilers and heat pumps.
Thanks to high-performance insulation, oil, gas or LPG consumption will be much lower. Lower heat losses mean lower carbon emissions which is a first step on the road to net zero.
Key features
- A+ Energy Efficiency Rating Class
- Space-saving – up to 4 x smaller than the hot water cylinder it replaces
- Flexible orientation with exits on three sides
- Lower heat losses – up to 4 x higher energy efficiency
- A+ energy rating – saves up to 1000 kWh a year
- High flow rate hot water
- Instantaneously heated for hygiene and freshness
- Fast and easy to install – no tundish, no high temp discharge pipework and T&P safety valve to maintain
- No mandatory annual maintenance Market-leading 10-year warranty on the heating element
- Works with any type of regular or system boiler
How it works – Thermino
General Specifications
| Product Code | TGP-FGW-AVZ-1 |
|---|---|
| Equivalent hot water cylinder size (L) | 71L |
| V40 (L)* | 85 |
| Heat loss rate (kWh/24) (W) | 0.45 (18.7) |
| Energy efficiency rating class | A+ |
| Recommended flow rates (LPM) | 6 |
| Minimum heat source flow temperature | 65°C |
| Maximum heat source flow temperature | 80°C |
| Minimum mains supply pressure | 1.5 bar (0.15 MPa) |
| Maximum mains pressure | 10 bar (1.0 MPa) |
| Hot water temperature | 45-55°C |
| Product weight in use (kg) | 59 |
* V40 refers to the volume (in litres) of hot water available at 40°C. NOTE: In line with UK Building Regulations, Sunamp advises the installation of a suitable hot water supply tempering valve at the outlet of the appliance, to prevent the risk of scalding.
Dimensions
Dimension 2 - 365 mm
Dimension 3 - 410 mm
Dimension 4 - 37 mm
Dimension 5 - 78 mm
Dimension 6 - 50 mm
Downloads
You’ll find technical data, dimensions, part numbers, installation instructions and much more in these information leaflets.