Mikrofill 3 Pressurisation Unit - EFD120021
by MIKROFILL
SKU EFD120021
The Mikrofill 3 is the most advanced “direct type” pressurization unit available, suitable for LPHW/CHW applications of any size.
Unlike “pump type” pressurization units the Mikrofill 3 is designed to be connected directly to a building's incoming mains/boosted water supply and fill a heating or chilled water system without the use of a pump.
The Mikrofill 3 is the most energy-efficient unit of its kind consuming as little as 10 watts/hr on standby and 30 watts/hr fully operational.
The Mikrofill 3 pressurization unit incorporates:
- Fluid Risk Category 4 backflow prevention
- The ability to fill directly from mains/ boosted water supply any LPHW or CHW system from empty
- Comprehensive electronic pressure management
Pre – commissioned packages are available which include the Mikrofill 3 with appropriately sized vessels and service drain valves.
Key Features
- Integral fluid risk category 4 backflow prevention - No RPZ valve required
- Fills any LPHW/CHW system from empty - Connects directly to the mains/boosted water supply
- The wall-mounted unit is only 270 mm high x 250 mm wide - Compact enough to fit in the smallest of plant rooms
- Consumes 10 watts on standby and 30 watts fully operational per hour - 97% more energy efficient than some pump-type units
- Fill volume indicator - Aids water treatment calculation
- Large colour screen display - Clear and concise instruction
- Pre - commissioned packages available - No onsite commissioning is required when sold as a package
Product Code | MIK120023 |
General | |
Warranty | 2 years |
WRAS | WRAS Approved Product (1806078) |
Conformity certification | UKCA, CE |
Performance | |
Cold fill pressure - max | 4.7 bar |
Inlet pressure - max | 5 bar |
Flow rate - nominal | 14 l/min (at 2 bar) |
Electrical | |
Power supply (Vac/Ph/Hz) | 230 V a.c. / 1 / 50 Hz |
Current - full load | 1.0 Amps |
Current - starting | 1.0 Amps |
Fuse rating | 3 Amp |
BMS Relays - max load | 5 Amps |
Connections | |
Cold water inlet | 15 mm Compression |
System outlet | 15 mm Compression |
Drain (via tundish) | ¾" BSP |
Dimensions | |
Height | 270 mm |
Width | 250 mm |
Depth | 112 mm |
Weight - dry | 5.0 kg |