Skip to content
SKU 21606

Flamco Pro PDS 231 Dosing Press Unit 1-3bar

by Flamco
Original price £5,890.09 Ex-VAT
Original price £5,890.09 Ex-VAT - Original price £5,890.09 Ex-VAT
Original price £5,890.09 Ex-VAT
Current price £4,417.58 Ex-VAT
£4,417.58 Ex-VAT - £4,417.58 Ex-VAT
Current price £4,417.58 Ex-VAT
CLICK HERE TO REQUEST STOCK AVAILABILITY

Compact, totally enclosed digital pressurisation unit with electronic pressure transducer and user-friendly microprocessor for use on sealed systems in order to provide a minimum system pressure requirement. The correct fluid mix is blended on demand at the time of system top-up.

The Pro PDS (Pressurisation/Dosing System) is a floor standing, additive top-up mixing pressurisation unit with a 4 litre break tank to be connected to the mains supply. 18 litre tank for additive storage. Each time the unit tops-up the system with water, it also automatically adds additive from a dedicated tank at a predetermined rate, reducing intervention and maximising system protection. Available with double pump (for duty/standby configuration).

Application:
Commercial, Industrial and Residential.
System Volume (Guide): < 300,000 litres.

Product Features

  • For system volumes up to 300,000 litres.
  • Dry Run Protection.
  • Anti Seize Routine (Pump is pulsed for 2 seconds if inactive for 60 days, must be enabled at time of commissioning).
  • Pressure setting in 0.1 bar increments.
  • Electric pump, 230V 50Hz 1ph.
  • Colour: Grey (RAL 7016).
  • System fill mode.
  • Onscreen Service Reminder - 12 Months.
  • MODBUS RTU Communication Protocol.
  • Password protected.
  • Bi-directional programming menu.
  • Flood Protection (Pump Runtime Limiter, Excessive Start Alarm).
  • Pump pulse option.
  • Event logging: Alarm activations, Pump Run counter (activations per pump), Cumulative run timer (hours per pump), Electrical interuption.
  • Volt free contacts: Common Alarm (N/C), High Pressure Alarm (N/O), Low Pressure Alarm (N/O), Sensor Health (N/O), Pump 1 Health (N/O), Pump 2 Health (N/O).
  • Optional Additional Volt Free Contacts (Requires an additional factory fitted expansion board): Low Pressure Warning (N/O), High Pressure Warning (N/O), Low Water In Break Tank (N/O), Low Additive In Holding Tank (N/O), Pump 1 Run For Topup (N/O), Pump 2 Run For Topup (N/O).

Read more - Pro PDS - Topping Up | Flamco (aalberts-hfc.com)