Uponor Ecoflex Thermo Single – Pre-Insulated Underground Heating Pipe
Uponor Ecoflex Thermo Single – Pre-Insulated Underground Heating Pipe
The Uponor Ecoflex Thermo Single is a flexible, pre-insulated pipe system designed for buried heating and cooling applications.
It uses a durable PE-Xa carrier pipe with oxygen barrier, surrounded by efficient PE-X foam insulation and protected by a corrugated HDPE outer casing.
The system is suitable for applications including heat pumps, communal heating, district heating and other underground heating or cooling networks where a single carrier pipe is required.
Key Features
- Single PE-Xa carrier pipe with oxygen barrier
- SDR 11 construction
- Suitable for heating and cooling applications
- Highly flexible for easier underground installation
- PE-X foam insulation
- Corrugated HDPE outer casing
- Available in specified cut lengths
- Coil lengths up to 200m depending on size
Technical Specifications
| Application | Heating and cooling |
| Carrier Pipe | PE-Xa with oxygen barrier |
| Pipe Standard | SDR 11 |
| Maximum Operating Pressure | 6 bar |
| Heating Operating Temperature | 80°C |
| Insulation | PE-X foam |
| Outer Casing | Corrugated HDPE |
Sold by the metre: 1 quantity = 1 metre of pipe.
Pipe & Fitting Selector
For each end of an Ecoflex Thermo Single pipe you require:
- 1 x rubber end cap
- 1 x WIPEX 6 bar coupling
For a typical continuous pipe run connecting two locations, you will therefore normally require 2 x rubber end caps and 2 x WIPEX couplings in total.
| Pipe | Rubber End Cap | Qty Per End | WIPEX 6 Bar Coupling | Qty Per End | Typical Total for One Continuous Run |
|---|---|---|---|---|---|
|
1018109 25/140 |
1018315 25 / 32 – 140mm casing |
1 |
1018328 25 x 1" |
1 | 2 end caps 2 couplings |
|
1018110 32/140 |
1018315 25 / 32 – 140mm casing |
1 |
1018329 32 x 1" |
1 | 2 end caps 2 couplings |
|
1018111 40/175 |
1018313 32 / 40 / 50 – 175mm casing |
1 |
1018330 40 x 1¼" |
1 | 2 end caps 2 couplings |
|
1018112 50/175 |
1018313 32 / 40 / 50 – 175mm casing |
1 |
1018331 50 x 1¼" |
1 | 2 end caps 2 couplings |
|
1018113 63/175 |
1018312 63 / 75 – 175mm casing |
1 |
1018332 63 x 2" |
1 | 2 end caps 2 couplings |
|
1018114 75/200 |
1018310 75 / 90 / 110 – 200mm casing |
1 |
1018333 75 x 2" |
1 | 2 end caps 2 couplings |
|
1018115 90/200 |
1018310 75 / 90 / 110 – 200mm casing |
1 |
1018334 90 x 3" |
1 | 2 end caps 2 couplings |
|
1018116 110/200 |
1018310 75 / 90 / 110 – 200mm casing |
1 |
1018335 110 x 3" |
1 | 2 end caps 2 couplings |
Please note: End caps and WIPEX couplings are supplied separately.
Installation Accessories
Shop Uponor Ecoflex Single Rubber End Caps
Used to seal and protect the insulation at each end of the Ecoflex pipe.
Shop Uponor WIPEX 6 Bar Couplings
Used to connect the PE-Xa carrier pipe to the heating system.
Need Help Selecting Your Ecoflex Pipe?
If you're unsure which pipe size, end caps or couplings you require, contact the B.E.E. team and we can help you select the correct components for your installation.