Sunamp Thermino 70 i ( Indirect Cylinder Replacements ) for Boiler / Grid Supply Thermal Battery
Thermino i – An indirect cylinder alternative that works with boilers and comes with a standby internal electric heating element for greater flexibility.
Thermino i
Like the Thermino model, our equally compact Thermino i heat batteries are also designed to work with boilers and come complete with a backup internal electric heating element covered by our market-leading 10-year warranty to provide a failsafe solution.
Thanks to our best-in-class insulation, gas, oil, or LPG consumption will be reduced. Lower heat losses mean lower carbon emissions and lower energy use, to help save money and the planet too. Available in four sizes to meet the needs of any size of household.
Key features
- A+ Energy Efficiency Rating Class
- Space-saving – up to 4 x smaller than the hot water cylinder it replaces
- Flexible orientation with exits on three sides
- Lower heat losses – up to 4 x higher energy efficiency
- A+ energy rating – saves up to 1000 kWh a year
- High flow rate hot water
- Instantaneously heated for hygiene and freshness
- Fast and easy to install – no tundish, no high temp discharge pipework and T&P safety valve to maintain
- No mandatory annual maintenance Market-leading 10-year warranty on the heating element
- Works with any type of regular or system boiler
How it works – Thermino i
General Specifications
| Product Code | DGP-CBW-AVZ-1 |
|---|---|
| Equivalent hot water cylinder size (L) | 71L |
| V40 (L)* | 85 |
| Heat loss rate (kWh/24) (W) | 0.45 (18.7) |
| Energy efficiency rating class | A+ |
| Recommended flow rates (LPM) | 6 |
| Minimum heat source flow temperature | 65°C |
| Maximum heat source flow temperature | 80°C |
| Minimum mains supply pressure | 1.5 bar (0.15 MPa) |
| Maximum mains pressure | 10 bar (1.0 MPa) |
| Hot water temperature | 45-55°C |
| Connected load at 230v, 50hz (W) | 2,800 |
| Product weight in use (kg) | 79 |
* V40 refers to the volume (in litres) of hot water available at 40°C. NOTE: In line with UK Building Regulations, Sunamp advises the installation of a suitable hot water supply tempering valve at the outlet of the appliance, to prevent the risk of scalding.
Dimensions
Dimension 2 - 365 mm
Dimension 3 - 440 mm
Dimension 4 - 37 mm
Dimension 5 - 78 mm
Dimension 6 - 50 mm
