Sunamp Thermino 150 ePV (PV Ready) Thermal Battery
Thermino ePV – A direct cylinder alternative that delivers hot water more efficiently from solar PV. Grid electricity provides greater flexibility when needed.
PV-ready heat batteries optimise self consumption of electricity generated for free. For even greater flexibility, Thermino ePV heat batteries use off-peak electricity from the grid to top up the charge automatically when required.
The Thermino ePV can also keep costs down by pre-heating water for a combi boiler or it can be used as a highly efficient stand-alone water heater to ensure instant, mains pressure hot water for all household taps and showers.
Super-compact to free up valuable storage space, these products are available separately or as Myenergi eddi package* and are the ideal replacement for traditional vented and unvented hot water cylinders and hot water only thermal stores.
Key features
- A+ Energy Efficiency Rating Class
- Space-saving – up to 4 x smaller than the hot water cylinder it replaces
- Flexible orientation with exits on three sides
- Lower heat losses – up to 4 x higher energy efficiency
- A+ energy rating – saves up to 1000 kWh a year
- High flow rate hot water
- Instantaneously heated for hygiene and freshness
- Fast and easy to install – no tundish, no high temp discharge pipework and T&P safety valve to maintain
- No mandatory annual maintenance Market-leading 10-year warranty on the heating element
- Works with any type of regular or system boiler
How it works – Thermino ePV
General Specifications
| Product Code | SKP-BAW-ATZ-1 |
|---|---|
| Equivalent hot water cylinder size (L) | 140 |
| V40 (L)* | 199 |
| Heat loss rate (kWh/24) (W) | 0.67 (28.1) |
| Energy efficiency rating class | C |
| Recommended flow rates (LPM) | 15 |
| Minimum mains supply pressure | 1.5 bar (0.15 MPa) |
| Maximum mains pressure | 10 bar (1.0 MPa) |
| Hot water temperature | 45-55°C |
| Connected load at 230v, 50hz (W) | 2,800 |
| Annual electricity consumption (kWh/annum) | 1,398 |
| Product weight in use (kg) | 139 |
* V40 refers to the volume (in litres) of hot water available at 40°C. NOTE: In line with UK Building Regulations, Sunamp advises the installation of a suitable hot water supply tempering valve at the outlet of the appliance, to prevent the risk of scalding.
Dimensions
Dimension 2 - 365 mm
Dimension 3 - 640 mm
Dimension 4 - 37 mm
Dimension 5 - 78 mm
Dimension 6 - 50 mm
