Cetetherm
Filters
- AlfaPilot (1)
- AquaCompact (1)
- AquaEfficiency (1)
- AquaFirst (2)
- AquaPlate (1)
- AquaProtect (1)
- AquaStar (1)
- AquaTank (4)
- Cetecoil (2)
- Maxi (1)
- Maxi Compact (1)
- Maxi Cooling (1)
- Maxi Special (2)
- Micro DPC (1)
- Micro HTC (1)
- Micro RTC (1)
- Micro STC (1)
- Midi Compact with IQHeat (2)
- Mini City Spares (5)
- Mini Eco (1)
- Mini Eco Spares (7)
- Mini Plus Spares (2)
- Mini STC2 (1)
- Pre-plumbing jig (1)
- Pressosmart (2)
- Sensor (1)
- 7. Actuator. DHW *(Option) (0)
- 5. Actuator. heating * (Option) (0)
- 7. Adjustable foot (0)
- 20. Atmoshpere pipe (0)
- 3. Balancing valve (0)
- 12. Balancing valve. DHWC (0)
- 7. Charging kit support (0)
- 4. Charging pump (0)
- 8. Check valve (0)
- 14. Closed Water tank storage (0)
- 1. Cold water inlet (0)
- 1. Cold water inlet with specific stratification feature (0)
- 1. Cold water valve (0)
- 28. Connection expansion vessel (0)
- 3. Control box (0)
- 3. Control center * (Option) (0)
- 6. Control valve. DHW (0)
- 4. Control valve. heating (0)
- 38. CW (0)
- 37. DH Return (0)
- 41. DH supply (0)
- 40. DHW (0)
- 39. DHWC (0)
- 29. Draining valve. DH supply (0)
- 19. Draining valve. DHW supply (0)
- 22. Draining valve. heat supply (0)
- 9. Exchanger with insulation (0)
- 2. Feeling electrovalve (0)
- 3. Heat exchanger charge inlet (0)
- 2. Heat exchanger. DHW (0)
- 1. Heat exchanger. heating (0)
- 43. Heat Return (0)
- 42. Heat Supply (0)
- 21. Hose (0)
- 3. Hot water circulation (0)
- 2. Hot water outlet (0)
- 4. Hot water recirculation inlet (0)
- 8. Inspection opening. (0)
- 9. Instrument connection. ½” (0)
- 6. Instrument connection. ¾” (0)
- 16. Network collector (left or right) (0)
- 17. Non return valve. CW (0)
- 14. Non return valve. DHWC (0)
- 13. Pressure Relief Valve(s) (0)
- 5. Pressure sensor (0)
- 4. Primary flow. male thread (0)
- 5. Primary return. male thread (0)
- 5. Primary single or double pump (as per version) (0)
- 17. PRV outlet (0)
- 24. Pump heating (0)
- 10. Pump(s) (0)
- 13. Pump. DHWC (0)
- 6. Safety valve (0)
- 12. Safety valve (Tank overflow) (0)
- 18. Safety valve. CW (0)
- 25. Safety valve. heating (0)
- 5.Secondary charging pump (SS.DS.DD versions) (0)
- 9. Setting Tee (0)
- 4. Single or Double primary pump (as per version) (0)
- 27. Strainer. heat return (0)
- 19. Tank drain valve (0)
- 15. Tank Inlet/Outlet collector (0)
- 36. Temp.sensor heating return (0)
- 10. Temperature sensor. DHW supply *(Option) (0)
- 9. Temperature sensor. heating supply *(Option) (0)
- 8. Temperature sensor. outdoor *(Option) (0)
- 4. Top air vent (0)
- 20. Topping up (0)
- 7. Two or three anodes available depending on the volume of the tank (0)
- 2. Valve actuator (0)
- 8. Visit or manhole opening (0)
- 11. Weight control box (0)
- 6. Weight Sensor + adjustable foot (0)
- 1. Control Box including Micro3000 6 Secondary charging pump (0)
- 1. Control box with Micro 3000 controller (0)
- 1. Storage tank. 316Ti stainless steel storage tank. with a heat-insulated cover (0)
- 11. Shut-off valve. DHW (0)
- 15. Shut-off valve. DHWC (0)
- 16. Shut-off valve. CW (0)
- 18. Anti-hammer vessel (option) (0)
- 2. Plate heat exchanger. 316-grade = stainless steel fusion-bonded. copper-welded or dismountable plates and gaskets (0)
- 2. Signal actuator 7 Safety valve (0)
- 23. Shut-off valve. heat supply (0)
- 26. Shut-off valve. heating return (0)
- 3. Secondary charging pump (DD version only) S1 Temperature sensor (0)
- 3. Secondary charging pump 8 3-port mixing control valve (0)
- 4. Temperature sensor S1 9 Plates Heat Exchanger with Insulation (optional) (0)
- 5. Connector hose between tank and charging pump. thermally-insulated (0)
- 5. Two added Rp 2" connections for extra inlet or safety valve installation (not proposed on 2500 and 3000 litres enamel tank) (0)
- 6. Connector hose between exchanger outlet and upper tank. thermally-insulated (plates and gaskets exchangers only). (0)
- 6. Rp 3/4" added sensor connection on all the range except on 2500 and 3000 litres enamel tank where an added Rp 2" on the bottom of the vessel. is proposed instead (0)
- 7. 3 port mixing control valve (0)
- 7. Air vent. 1/2” (0)
- 8. Copper brazed or 100% stainless steel heat (0)
- 9. 100 mm glasswool (M1) or rock wool (M0) insulation (0)
- A. Primary inlet PP Primary pump (0)
- MP4N (1 pump) With open tank (0)
- MP5N (2 horizontal pumps) with open tank (0)
- MP7N (2 vertical pumps. 2 pressure relief valves) With open tank (0)
- MP195NL (1 pump) with open tank (0)
-
Cetetherm AquaProtect - Spare Parts
CetethermAnti-legionella domestic hot water system for collective applications - up to 765 kW AquaProtect is a range of...
View full detailsSort by
Added to your cart:
** total_quantity ** | ** unit_price ** / ** unit_measure **
- (-)
Cart subtotal