Sunamp Thermino 70 iPV (PV Ready) - Thermal Battery for Indirect and solar PV cylinder
A+ Energy Efficiency Rating Class
Thermino iPV – Delivers hot water efficiently from solar PV and boiler as an indirect cylinder alternative. With grid electricity backup for greater flexibility when required.
Thermino iPV
Marrying a solar PV system with a Thermino iPV provides households with cascades of hot water, even when the sun doesn’t shine. It works by storing surplus electricity from solar PV that would otherwise be lost to the grid, giving an abundance of hot water for free when it’s needed. A secondary heat source, such as a boiler, is always ready to take over when the sun is not shining.
Super-compact to maximise space in the home, these products are available separately or as myenergy eddi package* and are the ideal replacement for traditional vented and unvented hot water cylinders and hot water-only thermal stores.
Key features
- A+ Energy Efficiency Rating Class
- Space-saving – up to 4 x smaller than the hot water cylinder it replaces
- Flexible orientation with exits on three sides
- Lower heat losses – up to 4 x higher energy efficiency
- A+ energy rating – saves up to 1000 kWh a year
- High flow rate hot water
- Instantaneously heated for hygiene and freshness
- Fast and easy to install – no tundish, no high temp discharge pipework and T&P safety valve to maintain
- No mandatory annual maintenance Market-leading 10-year warranty on the heating element
- Works with any type of regular or system boiler
How it works – Thermino iPV
General Specifications
| Product Code | DKP-DBW-ATZ-1 |
|---|---|
| Equivalent hot water cylinder size (L) | 142 |
| V40 (L)* | 185 |
| Heat loss rate (kWh/24) (W) | 0.67 (28.1) |
| Energy efficiency rating class | A+ |
| Recommended flow rates (LPM) | 15 |
| Minimum heat source flow temperature | 65°C |
| Maximum heat source flow temperature | 80°C |
| Minimum mains supply pressure | 1.5 bar (0.15 MPa) |
| Maximum mains pressure | 10 bar (1.0 MPa) |
| Hot water temperature | 45-55°C |
| Connected load at 230v, 50hz (W) | 2,800 |
| Product weight in use (kg) | 136 |
* V40 refers to the volume (in litres) of hot water available at 40°C. NOTE: In line with UK Building Regulations, Sunamp advises the installation of a suitable hot water supply tempering valve at the outlet of the appliance, to prevent the risk of scalding.
Dimensions
Dimension 2 - 365 mm
Dimension 3 - 640 mm
Dimension 4 - 37 mm
Dimension 5 - 78 mm
Dimension 6 - 50 mm
Optional extras
- Sunamp 0.51 Expansion Vessel
- Sunamp Thermostatic Mixing Valve TMV / Tempering valve
- Sunamp Myenergi Edd