Flamco Flexfiller Plus 250D

The Flexfiller Plus and Midifill Plus are compact, fully enclosed digital pressurization units equipped with a vacuum degasser. They are designed for use on sealed systems and can provide the necessary minimum pressure while effectively removing dissolved gases. The units automatically sample, isolate, and subject the system fluid to a full vacuum, following Henry’s Law to release any dissolved air into the atmosphere. This process is continuously monitored and controlled by a digital processor, with the option for a turbo mode during initial setup of new systems. The status of the mechanical components can be viewed in real-time on the display.

System Volume (Guide): < 300,000 litres (Midifill Plus 150D: < 50,000 litres).
Application:
Commercial and Industrial.

Product Features:

• For system volumes up to 300,000 litres (Midifill Plus 150D: < 50,000 litres).
• Available with single pump (Midifill Plus) or double pump (for duty/standby configuration).
• Fluid Protection Category 5 (AB Weir Overflow.
• Onscreen Service Reminder - 12 Months.
• Individual controllers for pressurisation and degassing function.
• Vacuum degassing, turbo and normal interval modes.
• Electric pump, 230V 50Hz 1ph (2160D: 415V 50Hz 3ph).
• Colour: Midifill Plus: White (RAL 9003), Flexfiller Plus: Black (RAL 9005).
• MODBUS RTU Communication Protocol.
• System fill mode.
• Password protected.
• Pressure setting in 0.1 bar increments.

Technical Specifications

• Operating Conditions:
• System temperature range at point of connection: 5 ºC / 70 ºC.
• Ambient temperature range: 5 ºC / 40 ºC.
• Safety Rating: IP 54.
• Maximum Turbo Runtime: 168 hours (1 week).
• Maximum Normal Downtime: 180 minutes (3 hours).
• Relative humidity 95% non-condensing.
• Noise Rating Data: < 75 dBA.
• 
  
• Certifications and Standards Applied:
• PED 2014/68/EU Sound Engineering Practice.
• IEE - Electrical Safety Guidance.
• EMC 2004/108/EC.
• BS7074 Parts 1 to 3.
• Machinery Directive 95/16/EC.
• Electronic Components have been tested and comply with the EMC Directives.
• EN61000-6-2: Generic Standards – Immunity standard for industrial environments.
• EN61000-6-3: Generic Standards – Emission standard for residential, commercial and light industrial environment.
• CE marked components, where applicable.
• WRAS approved float valve to BS1212 part 2.
• IP54 (BS EN60529) rated controller.
• Material of Construction:
• Cabinet: Mild steel CR4.
• Float: WRAS Approved Beta Side Entry.
• Break Tank: WRAS Approved Polypropylene.
• Cylinder: Stainless steel 304.
• Pump: PEDROLLO (Unit dependant. See pump details for more information).
• Valves: Brass.
• Connection: Brass / Polypropylene.
• Pipework: Braided flexihose / EPDM / Copper.
• Finish: Powder coated.

Read More -Flexfiller Plus & Midifill Plus - Degassers | Flamco (aalberts-hfc.com)