Froling Turbomat TM 150 - 250 kW - Wood chip boiler, shavings and pellet fired

Name: Froling Turbomat TM 150 - 250 kW - Wood chip boiler, shavings and pellet fired
Brand: FROLING
Availability: InStock

by FROLING

SKU

Get in touch for a Quote - Contact us

Wood chip/pellet boiler for automatic burning of: fuel as per EN ISO 17225

Part 4: Wood chips class A2 / P16S-P31S,
Part 2: Wood pellets class A1 / D06 Optimum combustion technology thanks to:
Industrial moving grate combustion chamber for screw loading,with automatic ash rake under the grate elements for cleaning the combustion chamber even when in heating mode without shutting down the combustion system; grate elements made of heat-resistant material for homogenising the bed of embers, fluidised-bed combustion chamber with firebrick lining for high-temperature combustion, and air jacket for pre-heating of combustion air.

Vertical three-flue heat exchanger, incl. WOS automatic cleaning system made of high-heat-resistant turbulators
Automatic ash discharge from combustion chamber into mobile ash box with 160 l capacity (optional available from heat exchanger)
Automatic ignition with hot air igniter
Speed regulated and monitored induced draught fan
Underpressure-controlled combustion system

SPS 4000 control system: Used to control the drive units of the boiler system, upgradeable modular design

Stoker unit not included with boiler (available in a choice of three different models)

FBR chamber discharge system
Comprising:

Basic module with rotary agitator (spring or articulated torsion arms),
screw channel, feed screw 150 with geared motor, gravity shaft top with sprinkler and thermal valve

Advantages

Progressive air slide
Serviceability (possibility to dispense stainless steel; accessibility of the retort from above, screwed through Grate side plates, ...)
Possibility of burning fuels of dry to moist (water content 35%)
Temperature monitoring under the combustion grate
Lambdargelung with wideband probe for automatic adjustment to different fuels for optimal combustion
Power - saving drives with spur gear for the lowest power consumption
Very small space requirement thanks to optimized aggregate arrangement (two-sided)

Performance data TM	150	200	250
Nominal heat output kW	150	199	250
Output range kW	45 - 150	60 - 199	75 - 250
Electrical connection		400V / 50Hz / fused C35A
Weight - combustion chamber / heat exchanger kg	1150 / 1000	1290 / 1280	1290 / 1280
Total weight including fittings kg	3300	3820	3820
Water capacity liter	440	570	570
Water side resistance dT = 10 / 20 K mbar	36 / 12	55 / 18	75 / 25
Minimum boiler return temperature °C		65
Max. permitted operating temperature °C		90
Permitted operating pressure bar		3
Technical data TM	150	200	250
H1 Height, boiler including insulation	1880	1880	1880
H2 Height, flow/return connection	1935	1935	1935
H3 Height, stoker including burn back protection system	790	850	850
H4 Height, flue gas pipe connection without FGR	770	800	800
H5 Height, flue gas pipe connection with FGR	1105	1080	1080
B Total width including fittings	2170	2180	2180
B1 Width, boiler including insulation	1870	1930	1930
B2 Width, ash trolley	870	870	870
L Total length including fittings	2630	2860	2860
L1 Length, combustion chamber without insulation	1720	1880	1880
L2 Length, stoker unit	940	970	970
L3 Length, ash container	600	600	600
L4 Length, heat exchanger without insulation	790	950	950
Boiler data for sizing the flue gas system	150	200	250
Flue gas temperature NL / PL °C	150 / 110	150 / 110	150 / 110
Flue gas mass flow NL / PL kg/s	0,185	0,245	0,308
Minimum feed pressure NL / PL mbar	0,05 / 0,02	0,05 / 0,02	0,05 / 0,02
Flue gas pipe diameter	200	250	250

All information in mm!