Pellet Mole E3 for large pellet storage

Pellet mole E3 for large pellet storage

Based on the highly successful patented mole technique the Pellet Mole E3® continues development of the extraction technique ”from above”. The E3 is designed for larger pellet plants with boiler outputs from

40 to 300 kW and an annual pellet demand of several hundred tonnes. The typical storage sizes are up to 40 tons or 60 cubic meters capacity.

Equipped with the latest sensor technology, E3 recognizes the surrounding surfaces of his Pellet store and moves purposefully to the pellets. The star-shaped Round brushes made of high-loadable polyamide dose the pellet gently before the suction port and move the E3 smoothly over the pellet supply.

Due to the unique way of working there is no need for time-consuming and costly installations. The work area is up to 6 m in diameter and allows for the hose suspension also needed for long, narrow storage rooms.

The HD pellet mole can be used for storage room sizes of 60 m³ - 100 m³

Pellet mole E3® Hand Hoist for storage rooms < 60 m³ for PE1, PE1c, Consisting of:
Pellet mole E3® basic modul with 3 drive rollers and SP Dual compact
wear-resistant round brushes, with manual lifting device,
8 m suction hose incl.
9 m electric cables, wall bushing for PT4e with fastening material and small parts incl. extension of pellet module, RC element with relay

• For PE1, PE1c, P4, SP Dual, SP Dual compact - 13978
• for PT4e - 13978T4

Pellet mole E3® Comfort for storage rooms < 60 m³ for PE1, PE1c, consisting of: 
Pellet mole E3® basic modul with 3 drive rollers and Dual compact
wear-resistant round brushes, with automatic lifting device for PT4e incl. control system, 8 m suction hose incl. 9 m electric
cables, wall bushing with fastening material and small parts incl. extension of pellet module, RC element with relay

• For PE1, PE1c, P4, SP Dual, SP Dual compact - 13979
• for PT4e - 13979T4

HD Pellet mole E3® Comfort for ( for storage rooms 60 m³ - 100 m³) 
bestehend aus: SP Dual compact
Pellet mole E3® basic modul with 3 drive rollers and
wear-resistant round brushes, with automatic lifting device for PT4e incl. control system, 8 m suction hose incl. 9 m electric
cables, wall bushing with fastening material and small parts incl. extension of pellet module, RC element with relay, incl. spring hoist 4,5 m and Suction hose connection 90°

• For PE1, PE1c, P4, SP Dual, SP Dual compact - 13996
• for PT4e - 13996T4

Spring hoist 4,5 m - 13997
(if required according to the planning proposal)

Suction hose connection 90° - 60326
DN50 incl. 2 fastening clamps (if required according to the planning proposal)