Condensing Boiler PE1c Pellet 16 & 22

Condensing-Boiler PE1c Pellet

Fully automated condensing pellet boiler with induced draft fan and modulating fuel feed. For combustion of 6mm wood pellets according EN ISO 17225,

• Pellet burner with reliable and automatic cleaning by sliding gate and ash screw with external ash box (18 liters)
• Boiler body made of stainless steel
• Speed-controlled, quiet induced-draught fan with function monitor for maximum operational reliability
• Automatic silent ignition with glow starter
• Serial automatic WOS-technology (Efficiency Optimisation System) for maximum efficiency and automatic cleaning of the heat exchanger
• Additional heat exchanger cleaning by flushing device
• High safety against burnback with double slide system
• Pellet container (capacity 60 litre)
• Scrub and cleaning device set

optional:

• installable electrostatic particle filter

Control system P 3200 Touch

Microprocessor controls for optimising the combustion process through precise control of the boiler- and exhaust gas temperature, including actuators for primary and secondary air dampers, 7 ” color display for the representation of all important values and status messages with USB interface for updates; including lambda control

Scope of delivery:

• Core module
  • 2 mixing heating circuits (outside sensor included) and
  • 1 speed-controlled pump output or change-over valve
• Hydraulic module
  • 2 speed-controlled outputs for pumps or switching valve
  • 6 sensor inputs
• Outside sensor
• DWH management with 1 sensor
• Contact probe for 1 mixing heating circuit (2nd heating circuit possible via additional sensor)

Optional:

Control expandable to 18 heating circuits (wall enclosures) and total

8 hydraulic modules (wall housing); thereby numerous additional functions such as solar, oil / gas boilers, circulation, differential control

(e.g., water-borne chimney insert), etc. are possible. For additional equipment see connection diagrams.

Advantages

• For sliding operation, ideal for heating low-energy houses (sliding boiler temperature of 25 - 90 ° C)
• No need for an external return temperature control
• Automatic sliding grate for maintenance-free operation
• Serial automatic WOS-technology (Efficiency Optimisation System) for maximum efficiency and automatic cleaning of the heat exchanger
• Speed-regulated low-noise induced draught fan with function monitoring for highest operating safety

• Low power consumption (44 - 54 W at normal load)
• Generously dimensioned pellet container with automatic pellet conveying and integrated sound insulation (volume 60 liters)
  

• Double slide valve system for maximum back-fire protection
• Automatic ash ash removal in external ash box
• Flue pipe connection on the back or right possible
• Secondary air control for optimal combustion
• Automatic ignition device with glow starter
• New bus control design with Lambdatronic P 3200 micro-processor control

• 7” touch-display
• Online control with ”Fröling-APP”

NL = Nominal load, PL = Partial load

• Energy efficiency labeling in accordance with VO (EU) 2015/1187 as a combined system of solid fuel boiler and temperature controller
• Specified amount of condensate depending on heating return temperature and moisture content of the
• If the connection line and the junction to the chimney are pressure-tight, the resistance in the flue gas system at the flue gas connection on the boiler can be 10 Pascals

Related Accessories 

Click Below to Add to order each Accessories

• Pellets Suction Systems
• Pellets Suction Screw
• Pellet Supply Bin
• Pellets Bag Silo Systems
• Pellet mole & Pellets box