Pellet boiler PE1 Pellet 7 Unit to 20 Units
Get in touch for a Quote - Contact us
Fully automated pellet boiler with induced draft fan and modulating fuel feed. For combustion of 6mm wood pellets according EN ISO 17225, part 2: wood pellet class A1 / D06.
- High-quality pellet burner unit including moving grate and
- Large comfort ashcan for simple emptying and long emptying intervals ash boxes
- Speed-controlled, quiet induced-draught fan with function monitor for maximum operational reliability
- Automatic ignition
- Serial automatic WOS-technology (Efficiency Optimisation System) for maximum efficiency and automatic cleaning of the heat exchanger
- Double protection system for maximum burn back protection
- Energy-saving drive for double protection system and WOS
- External suction modul fitted in the return line in any position
- Integrated return feed lift function
- Room air-independent operation
- Boiler block (hot water tank 128 l as low storage tank under the boiler).
- Hydraulic block with one pump group for 1 heating circuit
- High-quality insulation
Control system P 3200 Touch
Microprocessor controls for optimising the combustion process through precise control of the boiler- and exhaust gas temperature, including actuators for primary and secondary air dampers, 7 ” color display for the representation of all important values and status messages with USB interface for updates; including lambda control
Scope of delivery:
- Core module
- 2 mixing heating circuits (outside sensor included) and
- 1 speed-controlled pump output or change-over valve
- Hydraulic module
- 2 speed-controlled outputs for pumps or switching valve
- 6 sensor inputs
- Outside sensor
- DWH management with 1 sensor
- Contact probe for 1 mixing heating circuit
(2nd heating circuit possible via additional sensor)
Optional:
Control expandable to 18 heating circuits (wall enclosures) and total
8 hydraulic modules (wall housing); thereby numerous additional functions such as solar, oil / gas boilers, circulation, differential control
(e.g., water-borne chimney insert), etc. are possible. For additional equipment see connection diagrams.
Technical data
|
Technical data PE1 Pellet Unit |
7 |
10 |
|
15 |
20 |
|
H Overall height of boiler with boiler block |
1810 |
1810 |
|
1810 |
1810 |
|
H3 Height of flow/return connection of the heating circuits |
1260 |
1260 |
|
1260 |
1260 |
|
H4 Height of flow/return connection of the boiler |
710 |
710 |
|
710 |
710 |
|
H6 Height of the hot water/circulation connection of the boiler block |
350 |
350 |
|
350 |
350 |
|
H7 Height of the cold water supply of the boiler block |
160 |
160 |
|
160 |
160 |
|
H10 Height, flue gas pipe connection |
1570 |
1570 |
|
1550 |
1550 |
|
H11 Height, supply air connection (for room air independent operation) |
980 |
980 |
|
970 |
970 |
|
H12 Height, suction system connection |
1720 |
1720 |
|
1720 |
1720 |
|
B Width of boiler with hydraulic block |
660 |
660 |
|
810 |
810 |
|
L1 Length, boiler block |
1150 |
1150 |
|
1190 |
1190 |
|
L2 Length, hydraulic block |
500 |
500 |
|
500 |
500 |
|
Flow and return connection for heating circuit ET |
1” |
1” |
|
1” |
1” |
|
connection, hot water, cold water, circulation ET |
3/4” |
3/4” |
|
3/4” |
3/4” |
|
connection for E-cartridge sleeve |
1 1/2” |
1 1/2” |
|
1 1/2” |
1 1/2” |
|
Permitted operating pressure (domestic hot water) bar |
6 |
6 |
|
6 |
6 |
|
Standby heat loss as per EN 15332 QB kWh/24h |
1,24 |
1,24 |
|
1,24 |
1,24 |
|
Performance indicator NL as per DIN 4708 |
1,2 |
1,2 |
|
1,2 |
1,2 |
|
Dispensing capacity at dispensing temperature 45°C |
155 |
155 |
|
155 |
155 |
|
Energy-efficient class domestic hot water tank |
|
|
B |
|
|
|
Holding losses Q W |
|
|
45,8 |
|
|
|
Water capacity domestic hot water tank liter |
|
|
127,7 |
|
|
All information in mm
|
Performance data PE1 Pellet |
|
7 |
10 |
15 |
20 |
|
Nominal heat output |
kW |
7 |
10 |
15 |
20 |
|
Output range |
kW |
2 - 7 |
2 - 10 |
4,1 - 15 |
4,1 - 20 |
|
Energy efficiency class of the boiler 1) |
|
|
|
|
|
|
Electrical connection 230V / 50Hz / fused C16A |
|||||
|
Power consumption |
W |
43 |
50 |
43 |
50 |
|
Boiler weight |
kg |
200 |
200 |
250 |
250 |
|
Total boiler capacity (water) |
liter |
25 |
25 |
38 |
38 |
|
Water side resistance dT = 20 K |
mbar |
0,8 |
2,1 |
4,0 |
5,0 |
|
Minimum flow rate |
l/h |
120 |
172 |
260 |
340 |
|
Pellet container capacity |
liter |
35 |
35 |
41 |
41 |
|
Ash box capacity |
liter |
14,5 |
14,5 |
20 |
20 |
|
Minimum return feed temperature |
°C |
Not applicable due to internal return temperature control |
|||
|
Maximum boiler temperature setting |
°C |
90 |
|||
|
Minimum boiler temperature setting |
°C |
50 |
|||
|
Permitted operating pressure |
bar |
3 |
|||
|
Airborne sound level |
dB(A) |
< 70 |
|||
|
Permitted fuel according to EN ISO 17225 |
|
part 2: Wood pellet class A1 / D06 |
|||
|
Recommended tank capacity approx. |
liter |
700 700 850 850 |
|||
|
Boiler data for sizing the flue gas system |
|
7 10 15 20 |
||||
|
Flue gas temperature |
NL / PL |
°C |
140 / 100 |
150 / 100 |
150 / 100 |
150 / 100 |
|
Flue gas mass flow |
NL / PL |
kg/h |
17 / 7 |
25 / 7 |
36 / 16 |
52 / 20 |
|
Flue gas mass flow |
NL / PL |
kg/s |
0,005 / 0,002 |
0,007 / 0,002 |
0,010 / 0,004 |
0,014 / 0,005 |
|
Co2 volume concentration |
NL / PL |
% |
11 / 9 |
11 / 9 |
11 / 9 |
11 / 9 |
|
Co2 volume concentration |
NL / PL |
% |
9,3 / 11,9 |
9,3 / 11,9 |
9,3 / 11,9 |
9,3 / 11,9 |
|
Required feed pressure |
NL / PL |
Pa |
5 / 2 |
5 / 2 |
5 / 2 |
5 / 2 |
|
Required feed pressure |
NL / PL |
mbar |
0,05 / 0,02 |
0,05 / 0,02 |
0,05 / 0,02 |
0,05 / 0,02 |
|
Flue gas pipe diameter |
|
mm |
99 2) |
99 2) |
129 |
129 |
|
NL = Nominal load, PL = Partial load |
|
|
|
|
|
|
Related Accessories
Click Below to Add to order each Accessories
- Pellets Suction Systems
- Pellets Suction Screw
- Pellet Supply Bin
- Pellets Bag Silo Systems
- Pellet mole & Pellets box