Froling Turbomat TM 300 to 550 kW - Wood chip boiler, shavings and pellet fired
Wood chip/pellet boiler for automatic burning of: fuel as per EN ISO 17225
- Part 4: Wood chips class A2 / P16S-P31S
- Part 2: Wood pellets A1 / D06
Optimum combustion technology thanks to:
- Moving grate combustion chamber to prevent cinder build-up and to transport the ashes to the gravity shaft, including automatic ash raking to minimise maintenance costs and high-quality firebrick lining.
- Chamber for loading by feed screw or hydraulic means designed as a welded tight steel construction; with water-cooled slide-in duct;
- Air-cooled grate elements made from high-heat-resistant casting
- Primary, secondary and tertiary combustion air control by means o servo-motor actuated progressive rotary slide valves.
- Ash removal in underfloor containers or by means of an ash removal screw in side-mounted vertical containers (optional).
- Two-sided mounting option of upright
- three-flue heat exchanger
- Automatic heating surface cleaning
- and automatic ash removal (optional).
- Boiler insulation made of coated steel plate cassettes with 100 mm mineral wool.
- In addition, it is possible to connect an oil or gas burner upstream of the heat exchanger.
SPS 4000 control system: Used to control the drive units of the boiler system, upgradeable modular design
- Boiler control unit with large touchscreen display
- Lambda control with broadband probe
- Control for a return feed mixer immersion sensor
Stoker unit not included with boiler
(available in a choice of three different models)
Advantages
- Upright three-flue heat exchanger
- Moving grate
- Ash rake for automatic removal of ash from under grate
- Automatic heat exchanger cleaning improved efficiency (WOS)
- Automatic ash removal from heat exchanger
- Defined air extraction from boiler insulation to minimise radiant heat losses
- Automatic heating surface cleaning
- Automatic ignition (can be upgraded to two-stage model for fuel that is hard to light)
- Bed of embers monitor via underpressure control
- Grate length / grate surface
- Uncooled combustion length (flame projection)
- Fireclay material
|
Performance data TM
|
|
300
|
400
|
500
|
550
|
|
Nominal heat output
|
kW
|
300
|
399
|
499
|
550
|
|
Output range
|
kW
|
90 - 300
|
119 - 399
|
149 - 499
|
165 - 550
|
|
Electrical connection 400V / 50Hz / fused C35A
|
|
Weight combustion chamber / heat exchanger
|
kg
|
1450 / 1470
|
2200 / 2150
|
|
2200 / 2150
|
2200 / 2150
|
|
Weight refractory material
|
kg
|
2150
|
2700
|
|
2700
|
2700
|
|
Total weight incl. fittings
|
kg
|
6200
|
8400
|
|
8400
|
8400
|
|
Water capacity
|
liter
|
560
|
750
|
|
750
|
750
|
|
Water side resistance dT = 10 / 20 K
|
mbar
|
10 / 1,9
|
14,3 / 5,6
|
|
14,3 / 5,6
|
19 / 8,5
|
|
Minimum boiler return temperature
|
°C
|
|
|
65
|
|
|
|
Max. permitted operating temperature
|
°C
|
|
|
90
|
|
|
|
Permitted operating pressure
|
bar
|
|
|
6
|
|
|
|
Technical data TM
|
|
300
|
400
|
|
500
|
550
|
|
H1 Boiler height including insulation
|
|
2440
|
2660
|
|
2660
|
2660
|
|
H2 Height, return connection
|
|
620
|
710
|
|
710
|
710
|
|
H3 Height, flow connection
|
|
1830
|
2000
|
|
2000
|
2000
|
|
H4 Height, flue gas pipe connection without FGR
|
|
2730
|
985
|
|
985
|
985
|
|
H5 Height, flue gas pipe connection with FGR
|
|
2730
|
2075
|
|
2075
|
2075
|
|
B Total width including fittings
|
|
2600
|
2990
|
|
2990
|
2990
|
|
B1 Width, boiler including insulation
|
|
2170
|
2495
|
|
2495
|
2495
|
|
L Total length including fittings
|
|
3250
|
3595
|
|
3595
|
3595
|
|
L1 Length, stoker unit
|
|
925
|
1050
|
|
1050
|
1050
|
|
Boiler data for sizing the flue gas system
|
|
300
|
400
|
|
500
|
550
|
|
Flue gas temperature NL / PL
|
°C
|
140 / 110
|
140 / 110
|
|
140 / 110
|
140 / 110
|
|
Flue gas mass flow NL / PL
|
kg/h
|
1439
|
1799
|
|
2249
|
2479
|
|
Minimum feed pressure NL / PL
|
mbar
|
0,05 / 0,02
|
0,05 / 0,02
|
|
0,05 / 0,02
|
0,05 / 0,02
|
|
Flue gas pipe diameter
|
|
300
|
350
|
|
350
|
350
|
All information in mm!
Downloads
